Residual municipal waste composition analysis – New methods for Czech waste management
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Relevant information about MW composition and proper forecasting of MW composition is crucial for relevant technical and economical modelling and business planning in the field of waste management. These include techno-economical models of MW treatment units, e.g. sorting line, transfer station, energy recovery, waste collection and transport or a regional waste collection and treatment system modelling (Kropáč et al. 2018) and complex business models concerning specific investments in waste management. In this context, there is a project under the Ministry of Environment of the Czech Republic.
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Relevant information about MW composition and proper forecasting of MW composition is crucial for relevant technical and economical modelling and business planning in the field of waste management. These include techno-economical models of MW treatment units, e.g. sorting line, transfer station, energy recovery, waste collection and transport or a regional waste collection and treatment system modelling (Kropáč et al. 2018) and complex business models concerning specific investments in waste management. In this context, there is a project under the Ministry of Environment of the Czech Republic.
Environmental effects of fireworks with special consideration of plastic emissions
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In Germany, about 133 million Euro are spent annually for New Year’s Eve fireworks, which result in 38,000 to 49,000 Mg of total firework mass. By a com-bination of desk research with official fireworks approval statistics, a customer survey, dismantling experiments with fireworks debris and with packaging characterisation, the total nationwide polymer emission was estimated to be 3,088 Mg. Out of this total mass, a projected polymer debris mass of 534 Mg was identified, and about 270 Mg of polymer packaging material. The remaining 2283 Mg of polymer mass are parts that eventually may remain at the launching site.
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In Germany, about 133 million Euro are spent annually for New Year’s Eve fireworks, which result in 38,000 to 49,000 Mg of total firework mass. By a com-bination of desk research with official fireworks approval statistics, a customer survey, dismantling experiments with fireworks debris and with packaging characterisation, the total nationwide polymer emission was estimated to be 3,088 Mg. Out of this total mass, a projected polymer debris mass of 534 Mg was identified, and about 270 Mg of polymer packaging material. The remaining 2283 Mg of polymer mass are parts that eventually may remain at the launching site.
Reporting of food waste in the EU – Results of current estimates in Germany
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In February 2019, the German Federal Cabinet adopted the 'National Strategy for Reducing Food Waste', setting a framework for the future direction of this initiative. Among other things, it stipulated that an inter-ministerial "Indicator 12.3 Working Group" should prepare the data bases and methods for nationwide balancing of food waste generation (baseline). Based on existing 2015 data, this status quo analysis will be used as a starting point to agree on milestones for the respective sectors.
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In February 2019, the German Federal Cabinet adopted the 'National Strategy for Reducing Food Waste', setting a framework for the future direction of this initiative. Among other things, it stipulated that an inter-ministerial "Indicator 12.3 Working Group" should prepare the data bases and methods for nationwide balancing of food waste generation (baseline). Based on existing 2015 data, this status quo analysis will be used as a starting point to agree on milestones for the respective sectors.
Applicability of multivariate data analysis to improve the sorting degree of recycled polyethylene
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
The Circular Plastic Alliance Declaration of the European Commission targets the us-age of 10 million tons of recycled plastic per year into new plastic products in Europe by 2025 (European Commission 9/20/2019). To assist this objective this work focuses on the improvement of mechanical sorting of polyethylene (PE).
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
The Circular Plastic Alliance Declaration of the European Commission targets the us-age of 10 million tons of recycled plastic per year into new plastic products in Europe by 2025 (European Commission 9/20/2019). To assist this objective this work focuses on the improvement of mechanical sorting of polyethylene (PE).
Municipal Solid Waste Management in Lahore, Pakistan - Characterization and Energy Content
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2018)
With rapid increase in population and urbanization, uncontrolled municipal solid waste system is causing public health and environmental issues in the mega cities of Pakistan.
© Lehrstuhl fĂĽr Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2018)
With rapid increase in population and urbanization, uncontrolled municipal solid waste system is causing public health and environmental issues in the mega cities of Pakistan.
A method for forecasting waste quantities
© Wasteconsult International (5/2017)
We present a method for forecasting annual waste quantities. The method is based on calculating material specific annual growth rates from trend analyses of time series.
© Wasteconsult International (5/2017)
We present a method for forecasting annual waste quantities. The method is based on calculating material specific annual growth rates from trend analyses of time series.
Status of Waste Management and Waste to Energy Technologies in Korea
© WTERT Asia (4/2017)
Slides from the presentation
© WTERT Asia (4/2017)
Slides from the presentation
A Presentation on WTERT India Activities and Advancement of WTE in India
© WTERT Asia (4/2017)
Slides of the presentation
© WTERT Asia (4/2017)
Slides of the presentation
Waste-to-energy and sustainable waste management in Singapore - NEWRI approach
© WTERT Asia (4/2017)
Slides from the presentation
© WTERT Asia (4/2017)
Slides from the presentation
